Mezzaluna Knife and Cutting Board Set | Wholesale

Описание

A Mezzaluna Knife and Cutting Board Set Is Defined by Three Fit Points

This mezzaluna knife and cutting board set combines a curved, single-edge stainless steel rocker knife with a concave wooden board. The knife has a wooden handle at each side.

Magnetic points on the side or back of the board provide an attachment position for storage. For a B2B buyer, the product is the fit among blade arc, board hollow, and magnetic retention—not simply “one knife plus one board.”

The photographed configuration is a starting reference for a private-label range or wholesale herb chopping set. Images show herbs or vegetables, cheese, pizza, and a fruit plate.

These are use directions, not identical performance claims for every ingredient. Define materials, dimensions, edge, magnets, surface treatment, care text, and packaging before sample approval.

Interface One: Make the Blade Arc Follow the Board Hollow

A mezzaluna works through a rocking motion. If blade curve and board hollow do not correspond, only a short edge section may make contact, or the knife may reach the raised perimeter too early. Approve the two parts of a mezzaluna knife and cutting board set together.

Rock the prototype through its intended range on a level worktop, first empty and then with buyer-selected ingredients. Observe edge contact and handle clearance. Herbs, pizza portions, cheese, and fruit differ in size and required force; the pictured examples should inform a test plan, not replace one.

The board is approximately 7.8 × 7.8 inches, about 1.9 inches at the highest area and 1.3 inches at the lower side. Define its concavity by a profile drawing or master sample, because overall dimensions do not describe the blade-to-board relationship.

Interface Two: Treat the Handles as Control Points

The knife uses one wooden handle at each side of one curved blade. During sample review, check handle length, diameter, rounding, alignment, and finger clearance throughout the stroke.

The knife is approximately 5.5 × 4.3 inches. Confirm what each figure measures on the drawing. A custom mezzaluna knife brief should also identify blade thickness, edge geometry, exposed-edge length, steel specification, handle material, joints, finish, and marking position.

For a mezzaluna chopper wholesale program, test the complete motion with the exact board. A handle may interfere with the rim, packaging insert, or storage position even when both components look correct separately.

Interface Three: Validate Magnetic Storage Separately

The pictured magnetic points allow the knife to attach to the side or back of the board. Retention is measurable: magnet position, polarity, distance through wood, contact area, knife placement, and board orientation can affect it.

Define how users attach and remove the knife. Test the approved mezzaluna knife and cutting board set with its actual finish, repeat attachment cycles, check for movement in the intended orientation, and document an acceptance method. Include normal dimensional and material variation.

Do not assume magnetic attachment protects the edge, locks the knife for shipping, or makes every position safe. Instructions should show the approved orientation, and packaging needs a separate restraint.

Reference Configuration for an Accurate Quotation

Use this reference to define the intended mezzaluna knife and cutting board set before requesting a quotation.

Product format	Single-edge curved stainless steel mezzaluna knife with two side wooden handles, paired with a concave wooden cutting board
Knife reference size	Approximately 5.5 × 4.3 inches; measurement directions and tolerances to be confirmed by drawing
Board reference size	Approximately 7.8 × 7.8 inches
Board profile reference	Approximately 1.9 inches at the highest area and 1.3 inches at the lower side; concave profile subject to sample approval
Board wood	The existing specification identifies beech wood; final species, grade, construction, and treatment must be confirmed on the approved sample and purchase order
Storage feature	Magnetic points on the side or back of the board for attaching the knife; retention method and orientation require validation
Image use examples	Herbs or vegetables, cheese, pizza, and fruit-plate preparation; buyer testing should reflect the intended range
Custom elements	Dimensions, blade details, handles, board profile, markings, finish, magnetic arrangement, instructions, and packaging, subject to feasibility and approval

Beech wood herb chopping board describes the current material direction, but appearance cannot verify species. Name the accepted wood and grade in the PO, and use an agreed sample for workmanship and appearance. Explore our kitchenware collection for related items.

Build the OEM Brief Backward from the User’s Motion

Begin with the user motion: define rocking range, likely ingredient size, working position, storage orientation, and pack format. Convert these decisions into one factory specification.

1. Set identity: assign separate codes to the knife, board, any edge guard, packaging insert, and completed set.
2. Knife drawing: show blade arc, width, thickness, cutting-edge zone, handle geometry, joints, marking area, and dimensional tolerances.
3. Board drawing: show plan dimensions, high and low areas, concave cross-sections, rim profile, magnet positions, and any logo location.
4. Material schedule: state the selected steel, handle wood, board wood, grades, surface treatments, and approved appearance references.
5. Fit criteria: define acceptable blade contact, handle clearance, board stability checks, and magnetic retention test method.
6. Safety information: establish blade warning, handling, storage, unpacking, and care language for the destination market.
7. Pack-out: identify component orientation, blade restraint, protective separations, labels, barcode position, and artwork revision.

Give every custom mezzaluna knife file a revision number. The quote, sample record, packaging artwork, and PO should agree. Learn more on our About page.

Design Packaging Around the Edge, Not Only the Shelf View

A mezzaluna knife and cutting board set must arrive with parts secured. Isolate the curved edge during unpacking and prevent contact with the board, magnets, or print in transit. Use a fitted insert, edge protector, or another validated restraint; do not rely only on storage magnets.

Support the raised board without allowing handles to strike its edges. After pack testing, inspect the edge, handles, board, magnets, print, and component count. Graphics should show correct attachment and grip.

Turn QC into Four Short Inspection Stations

Station	Inspection focus
Knife	Correct single blade; critical dimensions; arc and edge condition; handle alignment, finish, and secure assembly; marking and visible workmanship
Board	Plan size and profile; concave surface; agreed wood and appearance range; surface finish; cracks, deformation, rough areas, and magnet placement
Knife-to-board fit	Rocking contact path; handle and finger clearance; stability under the approved check; attachment orientation; magnetic retention according to the documented method
Packed set	Correct components and artwork; edge restraint; separation of parts; label position; movement inside the package; condition after the agreed packaging test

Write inspection limits before production and link them to the approved sample. Generic pass/fail language does not define a two-component fit.

Safe Use and Care Need Product-Specific Instructions

Use the board on a stable, level surface. Keep hands on the handles and fingers away from the edge and contact path. Rock with control; never reach beneath the blade or leave it loose.

Keep it away from children and store it only as instructed. Stop using loose, cracked, deformed, or damaged components.

Until final care is validated, hand wash without prolonged soaking and dry promptly. Avoid trapped moisture at joints or magnets; stainless steel should not be left wet. Package instructions must match the production sample.

Frequently Asked Questions

Does the set use two blades?

No. The photographed configuration has one curved cutting blade with a wooden handle at each side. Any quotation and artwork should state “single blade” clearly.

Is the board definitely beech wood?

The existing specification identifies beech wood, but the image alone cannot confirm species. The final wood, grade, construction, and treatment must be recorded on the approved sample and PO.

Are the magnets enough to secure the knife during shipment?

They should not be treated as the only shipping restraint. Magnetic holding performance must be tested for the intended storage position, while packaging should separately immobilize and protect the blade.

Can buyers change the board curve or knife dimensions?

Yes, subject to an OEM review. A change may affect rocking contact, clearance, magnetic alignment, packaging, and instructions, so approve the revised pair together.

Are herbs, cheese, pizza, and fruit all guaranteed applications?

They are use examples shown in the product imagery. Suitability depends on ingredient type, portion size, blade geometry, board profile, and the buyer’s acceptance test.

What information is needed for a quotation?

Provide quantity, market, drawings or sample, materials, finish, marking artwork, storage expectations, packaging, safety text, test criteria, and destination. Send your mezzaluna knife and cutting board set brief through our contact page for review.